M-48 Control
220
LOAD M-48 PROJECTS Window
You use the LOAD M-48 PROJECTS window to load M-48 projects
from a USB ash drive.
You can load dierent projects to multiple M-48 units.
To display the LOAD M-48 PROJECTS window, go to the M-48
MANAGER window and tap <MORE>, then tap <LOAD M-48
PROJECTS>.
M-48 list
M-48 project le list
M-48 project le list
This display the contents of a USB ash drive
inserted into the USB MEMORY connector on the
top panel.
0“M-48 Project File List” (p. 220)
M-48 list
This displays a list of M-48 units connected to the
REAC port.
0“M-48 List” (p. 220)
ALL
This selects all M-48 project les displayed on the
M-48 project le list.
LOAD UNIT NAME
Tapping this to turn it on loads the unit name
from the M-48 project le.
When this is turned o, the unit name does not
change when the M-48 project le is loaded.
BLINK LED
Tapping this to turn it on makes the LEDs on the
M-48 units selected using the M-48 list ash.
LOAD
This loads the M-48 project les assigned to the
M-48 units.
0“Loading M-48 Projects” (p. 221)
M-48 Project File List
DIRECTORY
CHECKBOX
DIRECTORY Directory
CHECKBOX
Checkbox
Turning on the checkbox assigns the M-48
project le to the M-48 displayed on the M-48 list.
0“Loading M-48 Projects” (p. 221)
FILENAME
M-48 project le name
Tap and hold or double-tapping this lets you
change the name.
You can move to the desired directory by tapping the following
icons.
Moves one level below the current folder.
Moves up one level.
Memo
Tapping the header of the FILENAME column sorts the folders
and les.
M-48 List
CHECKBOX
CHECKBOX
Checkbox
Turning on the checkbox lets you clear the M-48
project assigned to the M-48.
0“Loading M-48 Projects” (p. 221)
NO. M-48 number
UNIT NAME M-48 unit name
ASSIGNED FILE
This displays the M-48 project les assigned to
the M-48 units.
To Next Page
Loading...
Need help?
General
