Roland RS-50 System Update

Factory Reset Procedure:
1. With the power already turned On, press UTILITY.
2. PAGE / CURSOR right or left to select “5:Factory Reset.”
3. Press ENTER.
4. Press ENTER again to confirm.
Note: The Factory Rest process will take about 30 seconds to complete.
During this time NEVER power down the unit.
5. Once “Completed” is displayed, your may resume normal operation.
© 2005 Roland Corporation U.S.

Roland RS-50 Specifications

General

Brand	Roland
Model	RS-50
Category	Synthesizer
Language	English