Menu Mode
1. Press the [MENU] button.
2. Use the [VALUE] knob to select an
item.
3. Press the [TAP] button.$
Each time you press the [TAP] button,
you’ll switch between selecting an item
and editing its value.
CONP (COMP) 0 - 100
GAIN (GAIN) 0 - 200
TUNE (TUNE) -128 - 127
DECY (DECAY) -128 - 127
PAN (PAN) L64 - R63
BD (BD TYPE) NRM, L, DCY
H. lNK (HiHAT LINK) OFF, ON
CH (MIDI CHANNEL) 1-16, OFF
SYNC (MIDI CLOCK SOURCE)
AUTO
Int
9
Adjusts the level of compression
applied to BD and SD.
Adjusts the gain.$
Use the [2]–[12] buttons to select the
instrument.
Adjusts the tuning (pitch) of each
instrument. This can be set for BD,
RS, CP, CB, OH, and CH.
Adjusts the decay length.$
This can be set for SD, LT, MT, HT,
RS, CP, CB, and CH.
Adjusts the pan (left/right position) of
each instrument (L64– C0–R63).
Selects the type of BD (Normal, Long
Decay).
If this is On, the settings of OH and
CH (Tune and Level settings) are
linked. When they are linked, the
settings for CH are ignored (OFF, ON).
Specifies the MIDI transmit/receive
channel (1–16, OFF).
If MIDI clock is being input to the MIDI
IN connector or the USB port, the
TR-08’s tempo will automatically
synchronize to MIDI clock (Auto).
The TR-08 operates at the tempo
specified on the unit itself. Choose the
“INTERNAL” setting if you don’t want
to synchronize to an external device
(Int).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
