Roland V-combo VR-730 User Manual

Convenient Functions
42
You can download registrations
A wide variety of registrations can be downloaded from the
Axial sound library site and used on this unit.
For details, refer to the Axial site.
http://axial.roland.com/
Loading Saved Registrations from a
USB Flash Drive (Load Registration)
Here’s how a registration set saved on a USB ash drive can be
loaded into this unit.
NOTE
When you load a registration set, all registrations stored in this
unit will be overwritten and lost. If you don’t want to lose these
registrations, save them to a USB ash drive (p. 41).
1. Connect a USB ash drive (sold separately) to the USB
MEMORY port (p. 6).
2. Press the [MENU] button.
3. Turn the [VALUE] dial to select “Media Utility.”
4. Press the [ENTER] button.
5. Use the CURSOR [ ] [ ] buttons to select “Load
Registration.”
6. Press the [ENTER] button.
The LOAD REGISTRATION screen appears.
7. Turn the [VALUE] dial to select the registration set you
want to load.
If you decide to cancel, press the [EXIT] button.
8. Press the [ENTER] button.
The registration set will be loaded.
NOTE
Do NOT turn o the power or disconnect the USB ash drive
while “Executing...” is displayed.
9. Press the [EXIT] button several times to nish the
procedure.
Individually Loading Registrations from
a USB Flash Drive (Load One Regist)
Registrations saved on a USB ash drive can now be loaded
individually into this unit.
NOTE
When you load a registration, the loading-destination
registration will be overwritten and lost. If you don’t want to lose
that registration, save it to a USB ash drive before you proceed.
For details, refer to “Saving Registrations to a USB Flash Drive
(Save Registration)” (p. 41).
1. Connect a USB ash drive (sold separately) to the USB
MEMORY port (p. 6).
2. Press the [MENU] button.
3. Turn the [VALUE] dial to select “Media Utility.”
4. Press the [ENTER] button.
5. Use the CURSOR [ ] [ ] buttons to select “Load One
Regist.”
6. Press the [ENTER] button.
The LOAD ONE REGIST screen appears.
7. Turn the [VALUE] to select the registration set containing
the registration that you want to load.
8. Press the [ENTER] button.
9. Use the [VALUE] dial and the cursor buttons to select
the loading-source and loading-destination registration
number.
Loading-source
registration
Loading-destination
registration
10. Press the [ENTER] button.
The registration will be loaded.
NOTE
Do NOT turn o the power or disconnect the USB ash drive
while “Executing...” is displayed.
11. Press the [EXIT] button several times to nish the
procedure.

Roland V-combo VR-730 Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Compression, Delay, Overdrive, Reverberation
Sound effects quantity	268
Keyboard number of keys	73
Maximum polyphony (notes)	128
Reverberation effects quantity	6
USB ports quantity	2
6.35 mm (1⁄4-inch) input	1
Battery type	AA
Operating time	5 h
Power source type	AC, Battery
Number of batteries supported	8

Weight and Dimensions

Depth	366 mm
Width	1215 mm
Height	124 mm
Weight	9900 g