Roland XPS-10 User Manual

Getting Acquainted with the XPS-10
12
Editing a Value
Moving the cursor
Each single screen displays multiple items.
To change the setting of an item, move the cursor to that item.
Also, to select an item, move the cursor to that item.
001:Temp Perform
L Bs085 U Pf001
Move the cursor with the cursor [
K
] [
J
] buttons.
Changing a value
To change the value, use the VALUE [-] [+] buttons.
Pressing the VALUE [+] button increases the value; pressing the VALUE [-]
button decreases the value.
MEMO
To make the change occur more rapidly, hold down one button and
press the opposite button. You can also make the value change rapidly
by holding down the [SHIFT] button and pressing one of these buttons.
Entering Numeric Values
Press the [FAVORITE/NUMERIC] button twice; the NUMERIC function turns
on.
If you turn the [NUMERIC] button on, you’ll be able to use the VALUE [+]
(0)–[SAMPLE] (9) buttons to enter numeric values.
You can use this method to numerically specify patch numbers or
performance numbers.
1. Use the CURSOR [
K
] [
J
] buttons to move the cursor to the
number that you want to change.
2. Press the [FAVORITE/NUMERIC] button twice to make the
button blink.
The [0]–[9] buttons blink.
3. Use the [0]–[9] buttons to enter a numerical value, and
then press the [ENTER] button.
Your input will be nalized, and the illumination of the [0]–[9] buttons will
return to their previous state.
TIP
If you’ve pressed the NUMERIC function button and are entering a
numeric value, pressing the [EXIT] button will reset the value you were
entering.
Accessing the Menu Screens
Setting parameters
1. Press the [MENU] button.
<MENU> [ENT]
SYSTEM J
Pressing it again will return you to the previous screen.
2. Use the CURSOR [
K
] [
J
] buttons to select the item that
you want to edit, and press the [ENTER] button.
The corresponding edit screen appears.
3. Select the parameter that you want to edit, and use the
VALUE [-] [+] buttons to edit the value.
Press the [EXIT] button to return to the previous screen.
Editable items
Item
CURSOR [
K
] [
J
]
Explanation Page
SYSTEM
Make overall settings that specify how the entire
XPS-10 will operate.
p. 31
PATCH EDIT
Access the Patch, Performance, or Eect edit
screens.
Use the [SHIFT] + [MENU] (WRITE) buttons to
access the Write screen.
p. 25PERFORM EDIT
EFFECTS EDIT
SAMPLE
IMPORT
Import audio les from a USB ash drive into
internal memory.
p. 22
SAMPLE
DELETE
Delete an audio le that was imported into
internal memory.
p. 24
SAMPLE EDIT
Edit an audio le that was imported into internal
memory.
For details, refer to “Parameter Guide” (PDF).
–
FAVORITE UTIL Edit or save settings for the Favorite function. p. 15
SCALE EDIT Create a user scale. p. 21
UTILITY Execute backup or restore operations. p. 33
DEMO PLAY Listen to the demo songs. p. 10
VERSION INFO View version information for the XPS-10. p. 34

Roland XPS-10 Specifications

General

Bit rate	16 bit
Product type	Digital synthesizer
Keyboard number of keys	61
Maximum polyphony (notes)	128
Reverberation effects quantity	5
Power source type	AC
Display type	LCD
Built-in display	Yes
Display number of lines	2 lines
Display number of characters	16
Headphone outputs	1
USB ports quantity	2

Weight and Dimensions

Depth	251 mm
Width	1002 mm
Height	93 mm
Weight	4000 g