ENEN
1514
Fig.1
- CLEANING & MAINTENANCE
Before cleaning or maintenance, turn the appliance off and always unplug the appliance.
Cleaning: Wipe with a soft dry cloth. Never wash the air conditioner with water. Never use volatile
substance such as gasoline or polishing powder to clean the appliance.
Air filter maintenance: It is necessary to clean the air filter after using it for about 100 hours. Stop the
appliance and then pull back the air filter. (fig.2) Use a vaccum cleaner, water or a soft dry cloth to
clean the filter, and then reinstall it. Do not use the appliance without the filter.
Fig.2
OPERATING INSTRUCTIONS
The electrical facilities of the room, as well as the installation and use of the appliance must comply
with the standards in force in your country.
Before first use, ensure that the voltage, frequency and power of your appliance are suitable for your
electrical supply.
Your device must operate with an earthed power socket. It is a class I appliance.
Before switching on your appliance, ensure that:
• The appliance is positioned in accordance with the instructions in this manual;
• The air intake and outlet grills are completely unobstructed;
• The appliance is placed on a stable horizontal surface;
Do not place under a clothesline or any other object likely to cause water to fall in the product.
N.B.: You are advised to unplug the appliance when not in use.
1. Control panel
2. Air outlet
3. Handle hole
4. Caster
5. Air filter
6. Air intake (Evaporator)
7. “External” air outlet (air conditioner mode)
8. Air intake (Condenser)
9. Water outlet drain
10. Power supply cord
Note : Please ensure if the water outlet drain is
well installed before use.
11. Exhaust hose
12&13. Exhausted connectors
14. Exhaust nozzle
15. Wall flange accessory and cap
16.
Window seal kit (included in AU5020F0 only)
1
2
3
4
5
7
6
8
9
10
INSTALLATION INSTRUCTIONS
13
12
11
14
15
16
To Next Page
Loading...
Need help?
General
