Royal Enfield Himalayan User Manual

Royal Enfield Himalayan 127
WARRANTY TERMS AND CONDITIONS
Royal Enfield Motorcycles are manufactured by following best quality practices in respect of the material and workman-
ship. Royal Enfield (RE) warrants its motorcycle to be free from manufacturing and material defect under normal use sub-
ject to following conditions.
1. RE will replace or repair defective part(s) at their Dealerships and Authorised Service Centre free of charge within a
period of 36 months/30,000 km from the date of sale, whichever is earlier.
2. In order to avail warranty benefits by second or subsequent owner the second/subsequent owner should inform the
nearest Royal Enfield Service Centre about the purchase of the bike and shall fill in the requisite details in the form as
requested by Royal Enfield.
3. The warranty shall be applicable only if all the services are availed in the respective period/kilometer ranges as per the
schedule in the owner's manual from RE Authorised Dealer/Service Centre.
4. During the warranty period, RE's obligations shall be limited to repairing/replacing part(s) of the motorcycle for free only
if the part(s), on examination is deemed to have a manufacturing defect. Defective part(s) which have been replaced will
become the sole property of RE.
5. Consumables like oil, oil filter, fuel etc. used during warranty repair/replacement are not covered and chargeable to the
customer.
6. Claims on proprietary items like tyres, spark plug, battery etc., should be taken up with the respective manufacturer or
their authorised agents in the area directly by the customer. RE shall not be liable in any manner to replace them through
their dealers. RE will, however, provide assistance in referring such claims on the respective manufacturer.

Royal Enfield Himalayan Specifications

General

Engine Type	Single Cylinder, 4 stroke, Air cooled, SOHC
Displacement	411 cc
Max Power	24.3 bhp @ 6500 rpm
Max Torque	32 Nm @ 4000 - 4500 rpm
Fuel System	Electronic Fuel Injection
Transmission	5-speed constant mesh
Front Suspension	Telescopic, 41 mm forks, 200 mm travel
Rear Suspension	Monoshock with linkage, 180 mm wheel travel
Front Brake	300 mm disc, 2-piston floating caliper
Fuel Tank Capacity	15 liters
Seat Height	800 mm
Ground Clearance	220 mm
Kerb Weight	199 kg
Bore x Stroke	78 mm x 86 mm
Compression Ratio	9.5:1
Clutch	Wet, multi-plate
Frame Type	Half-duplex split cradle frame
Tyre Size (Front)	90/90 - 21
Tyre Size (Rear)	120/90 - 17
Wheelbase	1465 mm
Rear Brake	240mm disc, single-piston floating caliper
ABS	Dual Channel ABS (Switchable)