OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT DUAL TEMPERATURE
GLUE GUN
PISTOLET À COLLE CHAUDE À
DOUBLE TEMPÉRATURE DE 18 V
PISTOLA DE PEGAMENTO DE
DOBLE TEMPERATURA DE 18 V
P307
WARNING: To reduce the risk
of injury, the user must read and un-
derstand the operator’s manual before
using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures, l’utilisa-
teur doit lire et veiller à bien comprendre
le manuel d’utilisation avant d’employer
ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
Important Safety Instructions ............. 3
Symbols
..............................................4
Assembly ............................................ 5
Operation .........................................5-7
Maintenance ....................................... 7
Illustrations ......................................8-9
Parts Ordering and Service
............................................Back page
TABLE DES MATIÈRES
****************
Instructions importantes concernant
la sécurité
...........................................3
Symboles
............................................4
Assemblage ........................................5
Utilisation ........................................5-7
Entretien .............................................7
Illustrations ......................................8-9
Commande de pièces et dépannage
......................................... Page arrière
ÍNDICE DE CONTENIDO
****************
Importantes instrucciones de seguri-
dad
.....................................................3
Símbolos
............................................5
Armado ..............................................5
Funcionamiento ............................. 5-7
Mantenimiento ...................................7
Illustraciones .................................. 8-9
Pedidos de piezas y servicio
......................................Pág. posterior