200 •
Program Mode Sam4POS 6600/4800II Program Manual v2.1
2.
3. Type a
DESCRIPTION for the
selected Revenue Center; the
X at the end of the field
clears the current
description.
4. Press the icon to
Test, Sort, or enter the Edit
Mode for the selected
device.
a. EDIT MODE – Set
devices as inactive or delete
devices as necessary.
b. SORT – Sort devices
alphabetically
5. Press the pencil icon to add a note for the selected revenue center entry.
Terminal & Network
This program area is used to view the current Terminal Information and to setup IRC (Inter-Register
Communication) for the system.
1. Select TERMINAL & NETWORK from the NETWORK & REVENUE selection menu. The
terminal information will REFRESH each time this area is accessed:
2. When the data has refreshed, the Terminal Info screen is displayed:
3. Press the SET TO MAIN or RELEASE MAIN button as needed.
a. SET TO MAIN – will set the current station as the Main terminal in an IRC configuration.
b. RELEASE MAIN – sets the current station as a satellite SUB Terminal.
Note: ICR must be turned off on all substations before the current MAIN station can be released.
To Next Page
Loading...
Need help?
General
