BN68-05029A-02
QUICK START
GUIDE
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control Stand Parts and Cables
Stand Mount Power Cord
x 4
Remote Control IR extender Wall mount adapter (46 inch and above)
46 - 50 inches models: 2 pieces (BN96-18153B)
55 inches and above models: 4 pieces (BN96-18153A)
Batteries (AAA x 2) Cable manager
Also included: Cleaning Cloth, User Manual
Step
1
Attach the TV to
the Stand
Step
2
Connect video
devices
Step
3
Insert the
batteries into the
remote control
Step
4
Power on and
start the initial
setup
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
1A
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
1B
Base Screws
Find the stand base and screws in the box
and set aside.
Screws
32 inch models: 7EA
40 inch and above models: 8EA
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C
Fit the stand and mount together, making sure
the notch on the mount aligns with the stand.
1D
Insert 4 screws and secure the stand to the
mount.
32-55 inches models:
x4 (M4 X L12)
60-65 inches models:
x4 (M4 X L10)
1E
1 2 3
Holding the stand parallel to the screen, slide
the stand into the notches on the back of the
TV.
1F
Insert screws and secure the stand to the TV.
32 inch models:
x3 (M4 X L12)
40-55 inches models:
x4 (M4 X L12)
60 inches and above models:
x4 (M4 X L10)
[UF6300_QSG]BN68-05029A-02ENG.indb 2 2013-10-22 �� 1:26:14
To Next Page
Need help?
General