62
Picture Options
Color Temp.
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Auto Motion Plus
Color Tone
10000K
O
O
Normal
O
O
Standard
-
The displayed image may differ depending on the model.
-
Auto Motion Plus is only available on the EDE, EME models.
Color Tone
If the input source is PC, DVI, HDMI, MagicInfo, HDBT (PC connection).
•
Off / Cool / Standard / Warm
If the input source is AV, Component, DVI, HDMI, HDBT or TV.
•
Off / Cool / Standard / Warm1 / Warm2
―
Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic.
―
Settings can be adjusted and stored for each external device connected to an input on the product.
―
Available input sources may vary depending on the model.
Color Temp.
Adjust the color temperature (Red / Green / Blue). (Range: 3000K–15000K)
―
This option is available when Color Tone is set to Off.
Digital Clean View
If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce any static
and ghosting that may appear on the screen.
•
Off / Low / Medium / High / Auto / Auto Visualization
―
Auto Visualization: When changing analog channels, displays signal strength.
―
Received signal intensity is the strongest when the bar is green.
―
Auto Visualization is only available on the DCE, DCE-M models.
―
When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•
Off / Low / Medium / High / Auto
To Next Page
Loading...
Need help?
General
