2
Use this camera in the following order
INSTRUCTIONS
Set up the camera
driver
Before connecting the USB cable to the PC and this
camera, you have to set up the camera driver.Install the
camera driver that is contained in the Application S/W CD-
ROM. (p.39)
Take a picture (p.29~100)
Insert supplied USB cable into PC USB port and the
camera USB connection terminal.(p.50)
Check the camera power. If the power is turned off, slide
the camera switch to power it on..(p..38)
Open Window
s EXPLORER and search [Removable
Disk](p.100)
Take a picture
Insert USB cable
Check the camera
power
Check
[Removable Disk]
To Next Page
Need help?
General
