Tools needed for installation
Proper installation is the owner’s responsibility.
HOWEVER, SERVICE CALLS PERFORMED AS A RESULT OF POOR SET-UP, ADJUSTMENT, AND
CONNECTION ARE THE RESPONSIBILITY OF THE INSTALLER.
Make sure you have everything necessary for proper installation.
1. GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
2. EXHAUST SYSTEM – must be rigid metal or flexible stiff-walled metal exhaust ducting.
See Exhaust Requirements.
Installation Instructions
Door
Control panel
Adjustable leg
Pliers Cutting knife Pipe wrench (gas only) Nut drivers
Level Screwdriver (standard) Duct tape Crescent spanner
To Next Page
Loading...
Need help?
General