Use the
ACTIVATION CARD
First.
Services Guide
Samsung R355C
ACTIVATION CARD
IMPORTANT START HERE!
1. Remove protector from your NET10 phone screen.
2. Install battery and back cover.
3. Begin charging your NET10 phone.
4. Turn your NET10 phone ON by pressing and holding the red
PWR/END key until the screen lights up.
(Find additional help inside this card.)
5. Once Steps 1–4 have been completed, you will be ready to
Activate. Go to www.NET10.com or call 1-877-836-2368
from another phone.
THE FOLLOWING IS YOUR SERIAL NUMBER:
Acard-NTR355C
GETTING STARTED
USING YOUR NET10 PHONE
ABOUT NET10 SERVICE
1
3
2
NET10-R355C
Questions? Visit www.NET10.com or call 1-877-836-2368
To Next Page
Need help?
General
