S&C Omni-Rupter User Manual

Printed in U.S.A.
2 S&C Photo Sheet 765-707
S&C Omni-Rupter
®
Switches
In addition to the wildlife discs, the wildlife protection
option includes insulated covers for the switch base. The
option also comes with a fiberglass interphase operating
rod, to further eliminate the possibility of phase-to-
grounded part contact by wildlife.
Retrofit Installed Switches
Wildlife protection is retrofittable to all installed Omni-
Rupter Switches in the upright mounting configuration.
The unique “snap-fit” design of the discs allows the pro-
tection system to be installed with the switch on
the pole . . . only a brief outage must be taken. No
tools are required. And no disassembly of switch
parts is needed. An easy to install insulating cover is
used for already-installed switches that wraps securely
around the interphase operating pipe.
Omni-Rupter Switch wildlife protection.
Base insulator
Fiberglass interphase
operating rod
Wildlife discs

S&C Omni-Rupter Specifications

General

Brand	S&C
Model	Omni-Rupter
Category	Switch
Language	English