11
7. The moving indicator under Finger Pressure shows the strength of touchscreens signal.
Nominally the Coarse Sensitivity slider is adjusted so the Finger Pressure indicator moves
about a third of the way along in response to a light touch.
8. The Press Threshold slider is used to adjust the sensitivity of the touch to simulate a mouse
button press. The driver recognises a touch when the Finger Pressure indicator exceeds the
position of the Press Threshold slider. As default this is the same sensitivity level as
required for mouse movement.
9. To make certain that the touch is sensitive enough all over the display area, move a finger
around the touchscreen and make certain that the Finger Pressure indicator always exceeds
the Press Threshold slider position.
To Next Page
Loading...
Need help?
General
