Sanyo CHDZ07263 User Manual

19
Setting the Timer (continued)
How to set the OFF timer ( )
Example: Stopping the air conditioner after 3.5 hours of operation
Operation Indication
1. Press the
ON/OFF
button once to start the air
conditioner.
2. Press the
TIMER SET
button to select the
mode.
The and time
indications (hour) flash.
3.
• Press the button until 3.5 is displayed.
• Press the button if the set time is exceeded.
4. Press the
SET
button to set the OFF timer.
How to set the OFF cycle timer ( )
Example: Always stopping the air conditioner after 3.5 hours of operation
Operation
1. Press the
ON/OFF
button to start the air conditioner.
2. Press the
TIMER SET
button twice to select the mode.
3. Set the time using the or button.
4. Press the
SET
button to set the OFF cycle timer ( ).
When the OFF cycle timer is set, the unit will always stop after 3.5 hours of operation.
How to set the ON timer ( )
Example: Starting the air conditioner 10.5 hours after the ON time setting
Operation Indication
1. Press the
ON/OFF
button to start the air
conditioner.
2. Press the
TIMER SET
button to select
mode.
The and time
indications (hour) flash.
3.
• Press the button until 10.5 is displayed.
• Press the button if the set time is exceeded.
4. Press the
SET
button to set the ON timer.
When the ON timer is set, the unit enters the paused state.
Canceling timer operation
Press the CL button to cancel operation. The time setting is canceled, and the timer indicator
no longer appears on the display.
NOTE
NOTE

Sanyo CHDZ07263 Specifications

General

Brand	Sanyo
Model	CHDZ07263
Category	Air Conditioner
Language	English