MAINTENANCE
Cleaning the heads (Fig. 15)
To ensure the continued high performance of your unit,
periodically clean the heads and pinch rollers to prevent
accumulation of dust or tape oxide deposits.
1.
Open both cassette compartment lids by pressing both
STOP/EJECT buttons.
2.
Moisten a cotton bud (1) with head cleaner or methyl-
ated spirit and apply to the faces of heads (4 and 7), rub
gently until all traces of dirt or oxide are removed. Also
clean the surfaces of the pinch rollers (3, 5 and 8) and
the capstans (2, 6 and 9).
8
9
Fig. 15
Installing the unit
Never place the unit near a source of extreme heat such as
a radiator or direct sunlight or in a moist environment.
Following this advice will safeguard the unit from damage.
Placing the unit in a well ventilated area is strongly recom-
mended.
Cleaning the unit
To retain the beauty of the control panel and cabinet,
simply wipe with a soft, freshly laundered cloth moistened
with plain lukewarm water.
-11-
To Next Page
Loading...
Need help?
General
