Saswell T21STK-0 User Manual

6
2. Turn off power to the heating and cooling system by removing the
fuse or switching the appropriate circuit breaker off.
3. Remove the cover of the old thermostat. This should expose the
wires.
4. Label the existing wires from the existing thermostat before
removing.
5. After labeling the wires, remove the wires from the wire terminals.
6. Remove the existing thermostat from the wall
7. Refer to the following section for instructions on how to install this
thermostat.

Saswell T21STK-0 Specifications

General

Brand	Saswell
Model	T21STK-0
Category	Thermostat
Language	English