Schaerer Ltd.
P.O. Box
Allmendweg 8
CH-4528 Zuchwil
info@schaerer.com
www.schaerer.com
Schaerer Coffee Vito | Version 03 | 07.2011
N° 022041
QRCSCV_w_en
Brewing unit
► Switch off the machine with the
button.
► Disconnect the power plug.
► Push the beverage outlet to its highest
position.
► Take out the grounds container.
► Pull out the drip tray.
Option 1: With drinking water tank
► Take out the drinking water tank.
► Pull out the drip tray.
► Hold the brewing unit from below and
pull the slider to the front.
The brewing unit is released.
► Tip the brewing unit vertically down-
wards and pull it out to the front.
► Turn the spindle of the brewing unit an-
ticlockwise with the multi-tool until the
scraper (A) is in the front ejection posi-
tion.
► Push both springs outwards over the
edge, thereby releasing them.
► Pull out funnel (B) in the direction of the
arrow.
► Hinge the insertion chute (C) upwards
out of the way.
► Remove any ground coffee residue
with a dry brush.
► Clean the brewing unit in warm running
water.
► Clean the brewing screen in running
water.
► Allow the brewing unit to dry fully.
► Remove any ground coffee residue
from the area of the drip tray pocket.
► Reinsert the dried brewing unit in the
reverse order.
► It may be necessary to readjust the
brewer spindle position a little with the
multi-tool.
To Previous Page
Loading...
Need help?
General
