THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
9
3.3 Technical data
WATERMAKER
WATERMAKER DIMENSIONS
FIG. 3-2
Weight: 26 Kg
Feed pump type: Diaphragm pump
Filters: No. 1 Cartridge filter 5 microns 2.32" x 5’’
Power supply: 12/24 VDC +/- 15%
Average electric consumption: 110 Watt/h average
Nominal fresh water production: 30 Lit/h +/- 20% @ seawater 25 °C salinity 35.000 ppm
CEE conformity: In compliance with directives 89/392 CEE sect.1 (general safety machines
requirements), 89/336 CEE (electromagnetic compatibility), 73/23 CEE
(electric safety requirements)
3.4 Features of the product
The fresh water produced by a Schenker watermaker, obtained by clean seawater, has a high purity. Despite
this, the potability may not be guaranteed: bacterium caused by non-observance of shutdown and cleaning
procedures may be present in the watermaker. Therefore, it is essential that the correct shut down and storage
procedures are followed to ensure continued purity of the fresh water. Furthermore, to improve the water safety
it is strictly recommended to install a backup treatment on board, such as a UV sterilizer or a microfiltration
system.
To Next Page
Loading...
Need help?
General
