Need help?Do you have a question about the Scheppach hf 50 and is the answer not in the manual?
General| Collet diameter | 6 / 8 mm |
|---|---|
| Max. tool diameter | 50 mm |
| Input | 230 V |
| Max. Cutting Depth | 50 mm |
| Table Size | 400 x 300 mm |
Emphasizes reading the manual, sharing information, and maintaining awareness for safe operation.
Details precautions for machine setup, environment, personal protection, and safe usage practices.
States machine complies with EEC directives and requires safety devices to be installed.
Defines operator responsibilities, safety rules, and handling of instructions.
Identifies risks from rotating tools, ejected workpieces, electrical hazards, and improper handling.
Highlights dangers from wood dust, wood chips, and noise exposure during operation.
Explains the spindle moulder's axis, intended use, and cutter diameter limitations.
Details the procedure for safely switching the machine on and off using the control panel.
Step-by-step instructions for fitting cutters, adjusting settings, and operating the machine.
Details requirements for electrical connections, repairs, and compliance with VDE/DIN standards.
Comprehensive list of safety guidelines for operating spindle moulders, covering handling, maintenance, and environment.
To Next Page
