*23780000*
23780000
Prepare for Installation
IMPORTANT NOTES
• DO NOT use a power drill for installation!
• Use a screwdriver to remove product from packaging.
• Install and test lock with door open to avoid being locked out.
• Pay special attention to step 1. If lock is installed with
the cam in the wrong position, the lock will not function
properly!
a Check door dimensions.
See consumer.schlage.com/Service-Support for door preparation
instructions if dimensions are different.
2³⁄₄" (70 mm)
OR
2³⁄₈" (60 mm)
Door Edge
2¹⁄₈" (53 mm)
Hole
5¹⁄₂" (140 mm)
Minimum
b Adjust bolt length, if necessary.
Measure the dimension shown. If the measurement is 2C\v” (70 mm),
extend the bolt.
2³⁄₈" (60 mm) 2³⁄₄" (70 mm)
OR
No adjustment needed. Rotate faceplate 180° to extend.
Not Extended Extended
Keypad
Bolt
Baseplate
Baseplate
Screws (2)
Cover
Cover
Screws (2)
Latch/Strike
Screws (4)
Strike
Reinforcement
Screws (2)
Reinforcement
Plate
Key
Additional Parts
Optional Bolt
Faceplate
Tools Needed
• Phillips screwdriver
• Tape Measure
• Pencil
Optional
• Flathead Screwdriver
• Wood Block
• Hammer
Model BE365
Keypad Deadbolt
Installation Instructions
Default Codes
Códigos de predeterminado
Codes du défaut
Place Label Here
Poner la etiqueta aquí
Placer l’autocollant ici
© Allegion 2018
Printed in U.S.A.
23780000 Rev. 06/18-f
Customer Service Atención al cliente Service à la clientèle
Calling From: Si llama desde: Tout appel provenant de:
U.S.A.
Estados Unidos
États-Unis
d’Amérique:
(888) 805-9837
Canada
Canadá
Canada:
(800) 997-4734
Mexico
México
Mexique:
018005067866
To Next Page
Need help?
General
