Product features
Product composition and components Name and function of each part
N : Registration / delete of PIN code, Card
/ Fob,fingerprint in normal mode
S : Registration / delete of PIN code, Card /
Fob, fingerprint in safety mode
( Communication function) :
To register or delete optional
communication module
[N], [S], [ ] button
Auto/Manual mode switch
Auto lock
[Auto lock]mode, door will be locked
automatically after closing.
Manual lock
[Manual lock] mode, door will be locked with
pressing manual lock button after closing.
Can open the door at anytime only by
pulling down this handle.
Push up to open the battery cover.
Button to lock the door by manual at
manual locking mode.
Slide switch
[N], [S], [ ] Button
1. Front Ass`y
2. Back Ass`y
Mute function
Double lock function
Wireless interlock
Battery replacement indicator
Trespass alarm function
Indicate operation status and
checking battery capacity.
Remaining battery 20%
Remaining battery 50%
Remaining battery 80%
Status indicator
Window icon
Name Product specication Remark
①
Front Ass`y 86.6mm(W) X 331mm(H) X 30mm(D)
Including rubber
pad
② Back Ass`y
82mm(W) X 310mm(H) X 33.7mm(D)
③
Back bracket 88mm(W) X 316mm(H) X 9.2mm(D)
Including rubber
pad
④ Mortise lock 105.4mm(W) X 240mm(H) X 24mm(D)
⑤ Strike 24mm(W) X 240mm(H) X 4.5mm(D)
⑥ Card / Fob ISO card, Tag key, Mobile tag key
⑦ Emergency key 3 EA
⑧ Key tail plate 1 EA
⑨ Handle shaft 152.7mm(W) X 8mm(H) X 8mm(D)
⑩ Handle shaft clip 2 EA
⑪ Battery 1.5V 'AA' Size LR6 Alkaline, 8ea(DC 6V)
⑫ Screws 1 set
⑬ User manual
Main User manual
⑭ Installation template
Using for making hole at the door
⑮ Communication pack
Communication pack
Optional
⑯
Remote key
Remote key
Optional
※
Installation condition
Door thickness 40~90mm
High
temperature
warning
ㆍWorking temperature : -15~55 C
ㆍSensor working temperature(high): 60 C +- 5 C
If a high temperature is detected that may cause a re, the
alarm will sound with a beeping sound for safety reasons.
If the Inside body is exposed to direct sunlight for a long
time and exceeds the set temperature, a beep will be
generated to protect the user. High temperature detection
also works with Double locking function.
Handle
Can open the door by pushing
down it after pressing PIN code
or touching Card / Fob or
fingerprint.
Touch the registered fingerprint on sensor and
then open the door.
Touch the registered Card / Fob to
open the door.
Indicate lock / unlock status.
Touch type numeric pad
open the door with emergency key by manual.
when battery does not operate, product may
be operated and unlocked by contacting 9V on
terminal located outside.
Factory setting
Item Setting Status Ref.page
Auto/Manual lock mode [Auto lock] 8
Normal mode / Safety Mode Normal mode 9-10
Voice guide volume (1~3 level) 3 level [Maximum] 7
Beep sound level (1~8 level) 8 level 7
①
④ ⑤ ⑥
⑦ ⑧
③
②
⑮
Optional parts
⑯
——————————————
USER MANUAL
——————————————
TOUCHPAD DIGITAL
DOOR LOCK
WITH FINGERPRINT READER
S-6500
Notice
Please read this manual before installation and operation.
The specications of the exterior and communication pack vary
depending on the product you purchased, so please check before
using it.
Remote keyCommunication pack
⑨
⑫
⑩
⑬
Screws
⑭
⑪
User
manual
Installation
template
Available to use PIN code as well as Card / Fob and fingerprint.
Voice guide (operation status, menu selection.) and provide 3 step
volume control system.
Automatic and manual locking mode set is possible with simple
switch operation from Inside.
If users do not open the door after unlocking the device it will lock
itself automatically.
When double lock function is activated, the door cannot be opened
from the outside, even with the registered card, PIN code or
fingerprint. Override key can still be used.
Door will not emit any sound when mute is activated.
Easy to check battery status with three step level indicator and
alarm when battery replacement is required.
When the door is opened by force an alarm will sound.
After multiple incorrect attempted entries an alarm will sound and
all the functions of the lock will be suspended for three minutes.
The alarm activates after three incorrect PIN/card entries and five
incorrect fingerprint entries.
When you enter your home with other people, you may not want
to show your PIN code to them. In this case, you may press any
numbers randomly and then enter your PIN code at the end and you
will still gain access.
Normal mode is ideal for new users or low security environments
Safety mode provides a higher security level via use of a manager
PIN code. Allows individual register and delete function which is not
provided in normal mode.
Safety precautions
Disassembling the door lock may damage the product. Damages
to the product caused by unauthorized persons may void the
warranty.
Please remove the batteries immediately from the product, if
you do not take this step immediately, the product may suffer
severe damage.
If the product is exposed to water or liquids, please wipe the
moisture off with a soft cloth. If moisture or foreign materials
penetrate the product, remove the batteries immediately.
If leakage is discovered, please wipe out with a dry cloth and
replace with new batteries. In case of exposure to leakage, wash
affected skin area with soap and water immediately.
Such materials may damage the surface of the lock or cause a fire.
Do not use damaged batteries.
It may damage the product or cause a malfunction.
It may damage the product or cause a malfunction.
The battery life is getting shorter and it may cause leaks or
explosion.
Dew condensation; small drops of water that form when warm air
touches a cold surface. Please check the environment of installation
area. Heavy dew condensation may damage the product or cause a
malfunction.
To Next Page
Need help?
General
