Mechanical Digital Locks
2 of 11
Page Question
Standard Code Change Mechanical Digital Lock
General Questions for SBL300, SBL310, SBL340, SBL350, SBL370
4 Q The door will not open when the code is entered into the lock.
4 Q I have changed the code from the original code and it will not work when I entered the
new code into the digital lock.
4 Q How many digits can I enter in the code
5 Q The knob handle of my standard code change digital keypad has got too much movement
within it before having even entered the correct code, is it faulty.
5 Q The inside pad handle will only turn in one direction and causes injury to the hand, is there
anyway of changing the pad handle to turn in the opposite direction
5 Q Can I remove the hold back facility
6 Q The latch has broke on the digital lock, can I get a replacement.
6 Q The springs have collapsed on the inside handle do you do a replacement for the springs.
6 Q I have some fixings missing in the parts pack, can I order spare parts
6 Q When I put the spindle through the door it does not locate in the inside unit.
6 Q The latch will not return to its fully extended position once having operated it through
either the external or internal part of the digital lock.
6 Q The latch does not enter the striker supplied.
General Questions for SBL300/ SBL310
7 Q I want to change the SBL310 for a Digital Lock with Easy Code, is this possible
7 Q Do you provide a 50 mm backset latch for the SBL310.
7 Q Do you do a SBL300 with a holdback option.
General Questions for SBL340/ SBL350
7 Q The knob handle on my SBL340/SBL350 digital keypad side will only rotate in one direction
have I got the wrong handed unit
To Next Page
Loading...
Need help?
General
