7
• When moving the cabinet, do not grip or push the Billboard Plate. Doing so
could deform or damage the part.
• If moving through a door or place with a low ceiling such as an elevator, you
should take apart the billboard and billboard plate.
Detailed instructions for removing the Assy Billboard and Billboard Plate can be found in Chapter 6 of this manual.
Please follow these instruction in reverse order for removal.
7-1 PRECAUTIONS WHEN MOVING FROM SITE
Ensure that the casters come
into contact with the fl oor before
moving.
Remove the Lower Stability
Brackets when moving over
greater distances.
Remove the Billboard and Billboard Plate
when transporting the machine in and out
of buildings or when passing through areas
with low ceilings.
To Next Page
Loading...
Need help?
General
