Sharp FV-DB2E Quick Start Guide

3 Connect the AC adaptor
2 Insert the memory batteries
This Quick Start Guide will help you to correctly install and operate your system.
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
1 Accessories
TINSEA049SJZZ
05D N YT 1
4 Turning on your unit
Press the ON/STAND-BY button to turn the power on.
When turned on for the first time, the unit scans radio sta-
tions automatically to create the station list.
After the scan:
The stations will be stored in alphanumeric order and the first sta-
tion on the list will be selected and you will hear it through the
speakers.
MODEL
FV-DB2E
DAB RECEIVER
AC adaptor × 1
(RADPAA001SJZZ)
or
(RADPAA002SJZZ)
“AA” size battery
(UM/SUM-3, R6, HP-7
or similar) × 2
1 Press and slide the cover to open the battery compartment.
2 Insert the supplied 2 “AA” size batteries (UM/SUM-3, R6, HP-
7 or similar) into the battery compartment.
1
2
3 Close the battery compartment.
Plug the AC adaptor into the wall socket, and then insert the
plug on the other end into the DC 9V socket.
5 Adjusting the volume
Move the operation lever toward VOL UP or VOL DOWN to
increase or decrease the volume.
21 39 40
.....
0
Memory batteries maintain the clock setting and preset stations for
the tuner.
Failure to install the batteries correctly will cause loss of memory
and the unit will revert to Auto Tune mode when next switched on.
Wall socket
(AC 230 - 240 V, 50 Hz)
To the DC 9V socket
FV_DB2E_QG.pm 05.4.21, 2:32 PM1

Sharp FV-DB2E Specifications

General

Brand	Sharp
Model	FV-DB2E
Category	Receiver
Language	English