- OR -
TV stands
Included accessories
Note: Images do not necessarily represent the exact design of your television.
Before using your new product, please read these instructions to prevent any damage.
STOP!
Do not plug your
power cord in until
all other devices
have been
connected.
START HERE
How do I attach the stands to my TV?
(not for wall mounting)
You’ll need: Phillips screwdriver and a soft
surface to lay the TV on.
1 Carefully place your TV face-down on a cushioned,
clean surface.
2 Align the TV stands with the screw holes on the bottom
of the TV, then secure the stands to the TV with the four
provided screws.
QUICK SETUP GUIDE
How do I prepare my TV for wall mounting?
(not for use with the TV stands)
You’ll need: Phillips screwdriver and a soft surface to lay the TV on.
1 Carefully place your TV face-down on a cushioned, clean surface.
2 See the instructions that came with your wall mount for more
information about how to correctly mount your TV.
OR
Final flat size: 593.85 x 419.61
M4 (20 mm length)
(4 pcs.)
Features
Front view
Back view
2
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your User Guide is
not provided in the box but is available online.
Go to: https://www.sharptvusa.com/support
Find your model. Under Owners Manual, click Download.
Your online User Guide opens.
MAKING CONNECTIONS
How do I watch TV
(cable, satellite, or antenna) or connect a device such as
a DVD or
Blu-ray
Disc player or game console?
Multi-purpose jacks: You can
plug any device that uses
HDMI into any HDMI jack.
However, certain devices
must be connected to the
ARC jack. See the instructions
that came with your ARC
device for more information.
Remote control
and two AAA
batteries
Using an HDMI cable (BEST)
Using an AV cable (GOOD)
How do I connect my TV to an antenna or cable wall jack?
OVER
AUDIO/VIDEO
OUT
[
2
][
1
]
1
2
LC-40LB480U
M4 × 20 mm screws
Full HD LED 1080p TV
.
[
1
][
2
]
Power indicator
Remote control sensor
INPUT
Power cord
Wall mount installation guide (not included)
Your TV has four VESA mounting holes on the back. If you attach a wall-mount
bracket to the back of your TV, the bracket must be securely attached using
all four holes.
If you do not use all four mounting holes, your TV may fall and cause property
damage or personal injury. See the documentation that came with your wall
mount for complete mounting instructions.
To Next Page
Need help?
General