24
View setting
Initial teletext page (DTV only)
If you set the language of the initial page (this page is
displayed for the first time after pressing m) for teletext
in DTV mode, it will start from the selected language
page.
1 Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Initial teletext
page”.
2 Press a/b/c/d to select the desired language,
and then press ?.
NOTE
• This function is available for teletext in DTV mode. This is not
available for teletext in ATV or external input mode.
• If the initial teletext page of the selected language in this
function is not included in a received broadcast, the default
initial page will be displayed.
View setting
MHEG-5 (EPG) (DTV only)
This function is set to enable MHEG-5 in DTV mode.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “MHEG-5 (EPG)”.
Item
Enable
MHEG-5 is displayed during DTV mode.
Disable
MHEG-5 is not displayed during DTV
mode.
NOTE
• This function is only displayed for models for the New Zealand
market. This function is not displayed for models for the other
market than “New Zealand”.
• When the country setting is set to “New Zealand” in the initial
auto installation, this function is available. When the country
setting is set to countries other than “New Zealand”, then this
item is grayed out and cannot be selected.
• The MHEG-5 is not displayed when there is no MHEG-5
information on broadcast in setting this function to “Enable”.
• When this function is set to “Enable”, subtitles may not be
displayed. If this occurs, set to “Disable” and then display of
subtitles will be possible.
Watching TV
LC80LE960X_EN_book.indb 24LC80LE960X_EN_book.indb 24 4/4/2014 1:08:06 PM4/4/2014 1:08:06 PM
To Next Page
Loading...
Need help?
General
