PRECAUTIONS TO BE OBSERVED BEFORE AND
DURING SERVICING TO AVOID POSSIBLE EXPO-
SURE TO EXCESSIVE MICROWAVE ENERGY
BEFORE SERVICING
CHAPTER 1. WARNING TO SERVICE PERSONNEL
CHAPTER 2. MICROWAVE MEASUREMENT PRO-
CEDURE
CHAPTER 3. FOREWORD AND WARNING
CHAPTER 4. PRODUCT DESCRIPTION
CHAPTER 5. GENERAL INFORMATION
CHAPTER 6. OPERATION
CHAPTER 7. TROUBLESHOOTING GUIDE
CHAPTER 8. TEST PROCEDURES
CHAPTER 9. TOUCH CONTROL PANEL ASSEMBLY
CHAPTER 10. PRECAUTIONS FOR USING LEAD-
FREE SOLDER
CHAPTER 11. COMPONENT REPLACEMENT AND
ADJUSTMENT PROCEDURE
CHAPTER 12. CIRCUIT DIAGRAMS
Parts Guide
No. S2503R209KPK/
MICROWAVE OVEN
R-209KK
SERVICE MANUAL
R209KK
MODEL
CONTENTS
SHARP CORPORATION
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
In the interest of user-safety the oven should be restored to
its original condition and only parts identical to those speci-
fied should be used.
WARNING TO SERVICE PERSONNEL: Microwave ovens
contain circuitry capable of producing very high voltage
and current, contact with following parts may result in a
severe, possibly fatal, electrical shock. (High Voltage
Capacitor, High Voltage Power Transformer, Magnetron,
High Voltage Rectifier Assembly, High Voltage Harness
etc..)
To Next Page
Need help?
General
