Siemens hicom 150 H optiset E standard User Manual

5
%HIRUH#<RX#%HJLQ
These operating instructions describe the optiset E standard, optiset E advance plus/com-
fort and optiset E advance conference/conference telephones in Version 1.0 of the Hicom
150 H system.
They describe all functions you can use from your telephone. You may find that some func-
tions you wish to use are not available on your telephone. This may be due to one of the
following reasons:
• The function has not been configured for your telephone - address any questions to
Customer Support.
• Your communication system does not support this function - contact your Siemens
sales representative to upgrade your system.
+RZ#WR#8VH#WKHVH#2SHUDWLQJ#,QVWUXFWLRQV
6FUHHQ#'LVSOD\V
6WHS#E\#6WHS
You will find a graphic representation of the steps
in logical sequence in the left column. Below is an
explanation of the symbols:
Lift the handset (off-hook).
Replace the handset (on-hook).
Conduct a call.
Enter a telephone number or code.
Enter the code.
or Press volume controls on the telephone.
Press the key.
Press the illuminated key.
Press the flashing key.
The option appears on the screen.
Press the key to confirm your selection.
Search for an option.
Press the keys,
until the option appears on the screen.
Then press the key to confirm your selection.
Program/Service
Speaker
Start conference?
Display contrast?
Line 1 displays prompts or acknowledgment
messages, depending on the situation.
Line 2 displays functions that you can confirm by press-
ing . If the symbol ">" appears on the right, you
can press to access further options.
Please dial
Return to held call?
>
oi.book Seite 2 Donnerstag, 3. August 2000 3:40 15

Siemens hicom 150 H optiset E standard Specifications

General

Brand	Siemens
Model	hicom 150 H optiset E standard
Category	Telephone
Language	English