Siemens MXL User Manual

Installation Instructions
Document No. 565-957
August 12, 2005
Siemens MXL Dr
iver
These installation instructions only cover the
connection of the Siemens MXL Driver to the MXL
system. For hardware installation of the Modular
Equipment Controller, see document number
565–570. For hardware installation of the Power
Open Processor, see document number 565–571.
Product Description
The Siemens
MXL Driver enables communication
between the
APOGEE
®
Automation System and the
MXL system
.
Product Nu
mbers
986-83379A
Siemens MXL Driver, Open Processor
with RS-485 BLN
986-83379B
Siemens MXL Driver, Open Processor
with Ethernet BLN
986-83379C Siemens MXL Driver, MEC with
RS-485 BLN, 8DI, 8DO, 8AI, 8AO,
point expansion support, HOA-ready
986-83379D
Siemens MXL Driver, MEC with
RS-485 BLN, 8DI, 8DO, 8AI, 8AO,
point expansion support, with HOA
986-83379E
Siemens MXL Driver, MEC with
RS-485 BLN, 8DI, 8DO, 8AI, 8AO,
point e x pansion su pport, modem,
HOA-ready
986-83379F
Siemens
MXL Driver, MEC with
RS-485 B
LN,8DI,8DO,8AI,8AO,
point ex
pansion support, modem, with
HOA
986-83379G Siemens MXL Driver, MEC with
Ethernet BLN, 8DI, 8DO, 8AI, 8AO,
point expansion support, HOA-ready
986-83379H
Siemens MXL Driver, MEC with
Ethernet BLN, 8DI, 8DO, 8AI, 8AO,
point expansion support, with HOA
Warning/Caution Notations
WARNING:
Personal injury/loss of life m ay occur if you
do not follow the procedures as specified.
CAUTION:
Equipment damage or loss of data may
occur if you do not follow the procedures
as specified.
Expected Installation Times
7 minutes.
Required Tools and Materials
• Flat-blade screwdriver (1/8-inch blade width).
• Wire strippers.
• Cabling and connectors. See the Connecting
the Siemens MXL Driver to the MXL System
section.
CAUTION:
Always wear an electro-static discharge
wrist strap and discharge accumulated
static before touching field panel
components.
Prerequisites
• Driver hardware is installed according to its
respective installation instructions.
Depending on the type of installation, other
prerequisites may have to be completed.
Connecting the Siemens MXL
Driver to the MXL System
Follow these steps to connect the Siemens MXL
Driver to the MXL system :
I
tem Number: 565-957, Rev. 030
P
age 1 of 4

Siemens MXL Specifications

General

Brand	Siemens
Model	MXL
Category	DC Drives
Language	English