Siemens OPENSTAGE 20 User Manual

inbetriebnahme.fm
A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual
2-1
Startup
Prerequisites
2Startup
2.1 Prerequisites
The OpenStage phone acts as an endpoint client on an IP telephony network, and has the fol-
lowing network requirements:
• An Ethernet connection to a network with SIP clients and servers.
• HiPath 8000 server.
• An FTP Server for file transfer, e. g. firmware, configuration data, application software.
• A DHCP (Dynamic Host Configuration Protocol) server (recommended).
• DLS (Deployment Service) for advanced configuration and software deployment
(recommended).
7
Only use switches in the LAN, to which the OpenStage phone is connected. An
operation at hubs can cause serious malfunctions in the hub and in the whole
network.

Siemens OPENSTAGE 20 Specifications

General

Brand	Siemens
Model	OPENSTAGE 20
Category	Telephone
Language	English