CE1N2873en
09.10.2003
Siemens Building Technologies
HVAC Products
2
873
Siemeca™ AMR
Pulse Adapter AEW36.2
The AEW36.2 pulse adapter acquires and handles the pulses from 1 or 2 con-
sumption meters with pulse output and transmits the data to a Siemeca™ AMR
network. For setting the parameters, the pulse adapter is equipped with 2 inter-
faces, 1 wired interface and 1 optical interface.
Use
The pulse adapter is a component of the Siemeca™ AMR system.
It is for installations where consumption meters with pulse output are used the data of
which shall be collected by the Siemeca™ AMR system. Such devices can be meters
for hot water, cold water, gas, electricity, etc.
Functions
• Acquisition of the pulses delivered by the connected consumption meters
• Monitoring the connecting cable in the case of metering devices with NAMUR circuit
• Handling of pulses and storage of consumption data and set day values
• Wireless transmission of data 6 times a day to the WT..16.. network nodes of the
Siemeca™ AMR system
To Next Page
Need help?
General