Siemens SINAMICS V20 User Manual

Commissioning via the SINAMICS V20 Smart Access
6.12 Backing up and restoring
SINAMICS V20 Converter
168 Operating Instructions, 10/2019, A5E34559884-012
6.12.2 Restoring
You can use the restore page to upload, download, delete, and/or restore the selected file
(*.xml file).
Note
The
restore process restores all parameters of access levels ≤ 4.
Uploading an existing file (recommended on PC)
Note that you must upload the proper backup file; otherwise, the module outputs the
following error message:

Siemens SINAMICS V20 Specifications

General

Power Range	0.12 kW to 30 kW
Overload Capacity	150% for 60 seconds
Protection Class	IP20
Storage Temperature Range	-40°C to +70°C
Altitude	Up to 1000 m without derating
Input Voltage	3AC 380 V to 480 V
Output Voltage	0 V to Input Voltage
Control Modes	V/f control
Ambient Temperature Range	-10°C to +60°C
Relative Humidity	5% to 95%, non-condensing
Communication Interfaces	Modbus RTU
Braking Resistor	Optional external