General security measures
4
The following section shows the general security measures you can take in order to protect
your system from threats. All of the measures are recommended.
Additional specific security measures for SINAMICS products can be found in chapter Security
measures for SINAMICS (Page 31).
To protect industrial plants and systems comprehensively against cyber attacks, measures
must be applied simultaneously at all levels. From the operational up to the field level – from
access control to copy protection. For this purpose, we use "Defense in Depth" as a general
protection concept, according to the recommendations of ISA99 / IEC 62443, the leading
standard for security in industrial automation.
6HFXULW\ULVNVGHPDQG
DFWLRQ
3K\VLFDODFFHVVSURWHFWLRQ
SURFHVVHVDQGVHFXULW\VHUYLFH
JXLGHOLQHVIRUWKHSURWHFWLRQRI
SURGXFWLRQSODQWV
3ODQWVHFXULW\
&HOOSURWHFWLRQ
SHULPHWHUQHWZRUN
ILUHZDOOVDQG931
1HWZRUNVHFXULW\
,QWHJUDWHGDFFHVVSURWHFWLRQ
LQWKHDXWRPDWLRQ
6\VWHPLQWHJULW\
6\VWHPKDUGHQLQJ
DXWKHQWLFDWLRQDQGXVHU
DGPLQLVWUDWLRQSDWFK
PDQDJHPHQWGHWHFWLRQ
RIDWWDFNV
'HIHQVHLQGHSWK
Figure 4-1 Defense in depth strategy
Industrial Security
Configuration Manual, 08/2017, A5E36912609A 19
To Next Page
Loading...
Need help?
General