Siemens SINUMERIK 808D Operating Guide

Operating and Programming — Milling Page 20 808D
Tool Setup
s
Press “Spindle stop” on the MCP to stop
the spindle.
Press “Spindle left” on the MCP to start the
spindle in the counter-clockwise direction.
Press “Spindle right” on the MCP to start
the spindle in the clockwise direction.
Press the “Machine” key on the PPU.
Press the “T.S.M” SK on the PPU.
Use the direction key to move the
highlighted cursor to “Other M func-
tion” and enter “8”. This will start the
coolant.
Press “CYCLE START” on the MCP.
Press the “Back” SK on the PPU.
Please make sure all the machine axes
are in safe positions before executing
the M function!
Execute M
function
Press the “Reset” key on the MCP to
stop the coolant function.
The coolant function button on MCP is
active.
Jog spindle
Press the “Machine” key on the PPU.
A tool must be loaded to the spindle.
Press the “JOG” key on the MCP.
Press the spindle direction key on the
MCP to start/stop the spindle.
SEQUENCE

Siemens SINUMERIK 808D Specifications

General

Brand	Siemens
Model	SINUMERIK 808D
Category	Control Unit
Language	English