This means that until the first dialog call is made - in other words, the time at which full
functionality becomes available (e.g. execution of PRESS blocks) - menus or softkey menus
can only be replaced by others in their entirety.
Template for configuration of the start softkey
A detailed description of all permissible positions for start softkeys and their configuration is
located in the easyscreen.ini file in the following directory:
[System SIEMENS directory]
/cfg
This file is used as a template for your own configuration of the start softkey.
See also
Lists of start softkeys (Page 289)
3.3.2 Functions for start softkeys
Functions for dialog-independent softkeys
Only certain functions can be initiated with start softkeys.
The following functions are permitted:
● The LM function can be used to load another dialog: LM
("Identifier"[,"File"])
● The LS function can be used to display another softkey menu: LS
("Identifier"[, "File"][,
Merge])
● You can use the "EXIT" function to exit newly configured user interfaces and return to the
standard application.
● You can use the "EXITLS" function to exit the current user interface and load a defined
softkey menu.
PRESS method
The softkey is defined within the definition block and the "LM" or "LS" function is assigned in
the PRESS method.
If the start softkey definition is designated as a comment (semicolon (;) at beginning of line)
or the configuration file removed, the start softkey will not function.
//S(Start) ; Start identifier
HS6=("1st screen form") ; Horizontal SK 6 labeled "1st screen form"
PRESS(HS6) ; PRESS method for horizontal SK 6
LM("Screen form1") ; Load screen form1 function, where screen form 1
must be defined within the same file.
Fundamentals
3.3 Definition and functions for start softkeys
SINUMERIK Integrate Run MyScreens (BE2)
34 Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
