Further parameters
If you have created unique cutting edge numbers, they will be displayed in the first column.
Column heading Meaning
D no. Unique cutting edge number
SN Cutting edge number
Magazine list icons
Icon/
Marking
Meaning
Tool type
Red "X" The tool is disabled.
Yellow triangle pointing down‐
ward
The prewarning limit has been reached.
Yellow triangle pointing up‐
ward
The tool is in a special state.
Place the cursor on the marked tool. A tooltip pro‐
vides a short description.
Green border The tool is preselected.
Magazine/location number
Green double arrow The magazine location is positioned at the change
position.
Gray double arrow (configura‐
ble)
The magazine location is positioned at the loading
position.
Red "X" The magazine location is disabled.
Procedure
1. Select the "Parameter" operating area.
2. Press the "Magazine” softkey.
See also
Displaying tool details (Page 723)
Changing a tool type (Page 727)
Tool management
13.8 Magazine
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 719
To Next Page
Loading...
Need help?
General
