GB/IE 33
Briefly press the ON / OFF button
5
. The LED indicator
9
shows the approximate charge status of the internal
battery capacity level for approx. 30 seconds.
Charging mobile devices with the
power bank
You can charge up to three devices at the same time using the
power bank
6
. If all outputs are used at the same time, the
sum of the output current may not exceed 3 A.
Connect the USB cable
7
or the original charging cable
of the device to be charged to one of the three USB
outputs: USB type C output
2
, USB type A output 1
1
,
or USB type A output 2
4
.
Then connect the USB-C plug of the USB cable
7
to the
USB-C input of the device to be charged. The charging
process will start automatically.
If your mobile device has a USB type C input, you can
use a type C to type C connection cable (not included)
to connect your device’s type C input to this power bank’s
USB type C output
2
. The charging process will start
automatically.
In case if the charging process does not begin immediately,
press the ON / OFF button
5
briefly to begin the charging
process. The current battery status of the power bank
6
is
displayed during the charging process by the LED indicator
for battery capacity
9
. The LED indicator for battery
capacity
9
will switch off after approx. 30 seconds.
To Next Page
Loading...
Need help?
General
