23
GB
1. Overview
1 On/off button with LED
2 Button and LED for the Soft function (for pressure-sensitive food)
3 Button and LED for the Marinate function
4 Button and LED for the Vacuum tube function
(for vacuum-packing containers and bags with valve above the connection9)
5 Button and LED for the Vacuum + Seal Film function
6 Button and LED for the Seal Film function (no vacuum)
7 Button and LED for the Wet function (for moist food)
8 Stop button with LED (all functions can be cancelled by pressing it)
9 Connection for vacuum tubes20
10 Sealing strip
11 Upper sealing ring
12 Rear reference ridges
13 Side reference ridges / handle of the collector16
14 Lower sealing ring
15 Welding wire
16 Collector for liquids (removable)
17 Lid
18 Film cutter
19 Compartment for film bag roll
Figure A:
20 Vacuum tubes (60 cm)
21 Adapter A (e.g. for Ernesto containers* and FoodSaver Lunchboxes**)
22 Adapter B (e.g. for FoodSaver freshness containers**)
23 Adapter C (e.g. for CASO containers** and FoodSaver storage boxes**)
* Not included in items supplied
** Containers from other manufacturers - not included in items supplied.
CASO is a registered brand of Caso Holding GmbH
FoodSaver is a registered brand of Sunbeam Products, Inc.
Figure B:
24 Power cable with mains plug
25 Opening for the power cable on the underside of the device
26 Cable spool on the underside of the device
__347713_Vakuumierer_B8.book Seite 23 Montag, 27. Juli 2020 12:36 12
To Next Page
Loading...
Need help?
General
