PART NO. DESCRIPTIONREF NO QTY.
48" Mower Deck - Height Adjust & Hitch Group
Footnotes
MOTOR, Electric Cutting Height Adjust 1 1715885SM 1
CAPSCREW, Hex Washer Head, Taptitek, 5/16-18 x 1, Black 2 1960373SM 2
BRACKET, Motor Mounting 3 1715875SM 1
LOCKWASHER, 1/4 4 1916964SM 3
CAPSCREW, Hex Head, 1/4-20 x 3/4 5 1923341SM 3
ADAPTER, Motor 6 1715886SM 1
WASHER, Plain, 1/4 7 1960353SM 1
NUT, Hex Centerlock, 1/4-20 8 1923358SM 1
ROLL PIN, 3/16 x 1 3/4 9 1960581SM 1
HUB, Shaft 10 1715887SM 1
WASHER, Nylon 11 1716998SM 1
BEARING, Thrust 12 1715891SM 1
SHAFT ASSEMBLY 13 1715888SM 1
NUT, Hex, 1/2-13 14 1916951SM 1
LOCKWASHER, 1/2 15 1916966SM 1
LEVER 16 1715881ASM 1
COVER, Rod 17 1716424SM 1
FITTING, Lube 18 1704314SM 1
TRUNNION 19 1715892SM 1
CARRIAGE BOLT, 1/2-13 x 2 1/2 20 1960489SM 1
SPACER 21 1679166SM 1
NUT, Hex Nylon Lock, 5/16-18 22 1919438SM 4
WASHER, Plain, 5/16 23 1919326SM 4
U-BOLT, Clamp 24 1678103SM 2
CLAMP 25 1708007SM 1
CAPSCREW, Hex Head, Taptite, 5/16-18 x 1/2 26 1924856SM 1
COVER 27 1717053SM 1
HARNESS, Mower lift 28 1716986SM 1
NUT, Hex Alm Insert Lock, 3/8-16 29 2860681SM 2
SPACER 30 1708973SM 2
WASHER, Plain, 3/8 31 1924940SM 2
CAPSCREW, Hex Head, 3/8-16 x 1 1/2 32 1921969SM 2
RETAINING RING, 5/8 33 2153124SM 2
WASHER, 5/8 34 1924366SM 2
HITCH & SHAFT ASSEMBLY 35 1719567ASM 1
ROD, Latch 36 1715872SM 1
PIN, Retainer 37 2176012SM 3
PIN, Hitch 38 1717075SM 2
HITCH & BAR ASSEMBLY, Mower Front Hitch 39 1715868ASM 1
SPACER 40 1715871SM 2
Note* If replacing bracket {Ref 42} on units prior to SN 60000, order PN 1719867 {Ref 35}. Spacer {Ref 40} and Shaft {Ref
41} are NO LONGER required as these are integral to the replacement bracket.
The above parts group applies to the following Mfg. Nos.:
95
2009
Milwaukee, WI, USA. All rights reserved
© Copyright by Briggs & Stratton Corporation
1692863 - 48" Mower
1693122 - 48" Mower
1693252 - 48" Mower
1694138 - 48" Mower
TP 400-2155-C-LG-SMA
To Next Page
Loading...
Need help?
General
