Singer 1410 User Manual

HEMMING
-HEMMING
FOOT OPTIONAL
Presser foot .
hemmer foot
Pattern selector
M
Stitch length
dial
1 to
4
Raise the foot
and the needle
to
its highest
position.
Replace the
foot
with the
hemmer foot.
Fold
over
the fabric edge by about
3
mm(1/8
inches) and
place it
under
the
foot. Secure the
folded
edge with a few
stitches. Take
out the workpiece and draw
the hem into the hemmer
foot by
pulling on the threads.
Lower the foot and sew
the hem.
During sewing, fold
the fabric
to the left
a
little and allow
it to
run into
the
hemmer foot
Make sure that the
fabric does
not move
under
the right half
of
the foot.
The
fabric
must be
fed
into the scroll of the
hemmer
sufficiently so that the
workpiece
edge
runs freely through
the
groove
under the foot.
pwnI
Fig.
1
Fig. 2
Fig.
4
—26—

Singer 1410 Specifications

General

Brand	Singer
Model	1410
Category	Sewing Machine
Language	English