8
TROUBLE SHOOTING
Before taking the unit to a service center, please check the following list of common
problems for your issue.
WARNING :If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualified person in order to avoid a hazard.
This electrical appliance complies with directive 2002/96/EC(Waste Electrical and
Electronic Equipment----WEEE).
The meaning of the crossed-through waste bin symbol on the appliance is
that the product must be disposed of separately to other household waste
at the end of the useful life of the appliance. The user is responsible for
delivering the appliance to an appropriate collection centre at that time.
Appropriate separate collection for environment-friendly treatment and
recycling prevents or reduces harmful effect on the environment and
human health. You can obtain information on available collection services in your area by
contacting your local Council waste collection department, or the retailer from which you
bought the appliance.
PROBLEM POSSIBLE CAUSE SOLUTION
Unit fails to steam.
Power Indicator Light
does not illuminate.
Unit fails to steam.
Power Indicator Light
does illuminate.
Steam Burst output is
weak or intermittent.
Unit is not plugged in.
Household Circuit Breaker/ Ground
Fault Interrupter has tripped or
blown a fuse.
Auto Shut-Off has engaged.
Water Reservoir is empty.
Unit is damaged or malfunctioning.
Refer to Auto Shut-Off section on
page 4 of this manual for proper
procedure.
Refill Water Reservoir using
procedures on page 4-5 of this
manual.
Please contact our customer
support department.
Pressing Plate needs to be cleaned.
Refer to Cleaning the Digital Fabric
Steam Press section on page 7 of
this manual for proper procedure.
Plug into electrical outlet.
Reset Circuit Breaker/Ground Fault
Interrupter, or replace fuse. If you
need assistance, contact a licensed
electrician.
ESP2_Instruction Manual.indd 8 23.12.2011 15:25:57
To Next Page
Loading...
Need help?
General
