Connect the machine to a power source as illustrated. (1)
Unplug power cord when machine is not in use.
The foot control pedal regulates the sewing speed. (2)
Consult a qualified electrician if in doubt as to connect machine
to power source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by KD-1902
(110-120V area)/ KD-2902 (220-240V area) manufactured by
ZHEJIANG FOUNDER MOTOR CORPORATION LTD. (China)
Press main switch (A) for power and light on"l".
Attention:
Foot control
Attention:
Sewing light
1
2
10
Connecting machine to power source
GB
A
To Next Page
Loading...
Need help?
General
