EasyManuals Logo
Home>SIP Protection>Safety Equipment>CSG 1

SIP Protection CSG 1 User Manual

Default Icon
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN
VISIP0540 01V/2018: Technical status : 28/03/2018 (subject to adaptions )
SIP PROTECTION, Fabriekstraat 23, 8850 Ardooie, Belg
Tel + 32 51 740 800 - +32 51 740 962
http://www.sip-protection.com mailto: info@sip-protection.com 1/3
Ffff aaaaaffff USER INSTRUCTIONS 0493
Protective clothing for users of hand-held chain saws
Chainsaw protective gaiters
PLEASE READ BELOW INSTRUCTIONS CAREFULLY BEFORE WEARING THESE GARMENTS
CHECK WITH YOUR SAFETY EGINEER OR YOUR SUPERIOR IF THIS GARMENT IS SUITABLE
FOR YOUR SPECIFIC WORKING ENVIRONMENT .
KEEP THESE INSTRUCTIONS CAREFULLY IN ORDER TO BE ABLE CHECK THOSE ON EACH
MOMENT*
(*) CHECK ON WWW.SIOENAPPAREL.COM IF YOU HAVE THE MOST RECENT VERSION
This gaiter fulfils the fundamental prescriptions of the European Regulation 2016/425 concerning
Personal Protection Equipment (PPE’s).. By means of type approval, this gaiter has been certified to
the European standard EN 381 Part 7 :1997 - Protective clothing for users of hand-held chain saws
chainsaw protective gaiters
Protective equipment with reference CSG1 will be labeled with above mentioned norms.
Type-examination has been done by CTC -Centre Technique Cuir Chaussure Maroquinerie, Parc
Scientifique Tony Garnier, 4, rue Herman Frenkel, F- 69 367 Lyon Cedex 07 (NB 0075).
If the number 0493 is shown on the right next to the CE pictogram on the sewn-in label, it means that it
is category III PPE of a complex design that is to protect the user against hazards which are fatal or
which can seriously and irreparably impair one’s health.. This type of PPE is submitted to an EC-
quality guarantee system of the production with supervision (module D). The supervision of our ISO
9001-system has been entrusted to BQA/CENTEXBEL (NB0493), Technologiepark 7, B-9052
Zwijnaarde.
The EU declaration of conformity can be found at the following Internet address: http://sio.to/eudoc
This PPE is in conformity with the REACH regulation. This PPE contains no elements of which is known
today that they can cause allergic reactions or which are known to be carinogenic or mutagenic .. This
product does not contain any substances at such a level that is known or suspected of having harmful
effects on the hygiene or health or the user within the expected conditions of usage. The design does
not cause any irritation or discomfort to the wearer. This personal protection equipment does not contain
materials that are known to provoke allergic reactions. If allergic reactions should occur, consult a
physician immediately and take contact with the manufacturer.
EN381-9:1997
The gaiter does not give you protection on the places where there is no protective material
The class to which the gaiter performs, the chain speed is mentioned on the label
Classification according to chain speed : class 1 : 20 m/s
class 2 : 24 m/s
class 3 : 28 m/s
EN 381-9:1997
Reference
Class
CSG 1
1 20 m/s

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SIP Protection CSG 1 and is the answer not in the manual?

SIP Protection CSG 1 Specifications

General IconGeneral
BrandSIP Protection
ModelCSG 1
CategorySafety Equipment
LanguageEnglish