SMC7004ABR Barricade Broadband Router
Installation Instructions
SPECIAL NOTE: Part D – Upgrading the Firmware in Your Barricade MUST occur
in ALL installations for multiple VPN sessions to work!!!
SPECIAL NOTE: Part F – Adjusting MTU Value. This procedure MUST be followed
in order to prevent chronic disconnections of the VPN tunnel!
Part A – General Setup
1. Open your Web browser and enter the following in the “Address” field:
http://192.168.2.1
2. The Barricade login screen will appear. Leave the password field empty and click on
“login”.
3. On the main page of the Barricade Web console, click “Setup”.
To Next Page
Need help?
General
