SMC Networks WUSBS-N3 User Manual

C HAPTER 5 | AP Mode Configuration
AP Mode Utility Configuration
– 34 –
◆ Country Region Code — Select the country region where the access
point is in operation.
Table 6: Country Channel List
◆ TX Power — Set the access point transmit power. (Default: 100%)
◆ Channel — The radio channel used to communicate with wireless
clients.
◆ Security Setting — Configure the authentication and encryption.
◆ Authentication – Selects the wireless security mechanism for the
network.
■
Open – Accepts any client attempting to connect to the access
point without verifying its identity.
■
Shared – Uses Wired Equivalent Privacy (WEP) to verify client
identity by distributing a shared key to clients.
■
WPA-PSK – Use pre-shared key authentication for WPA-compliant
clients.
■
WPA2-PSK – Use pre-shared key authentication for WPA2-
compliant clients.
■
WPA-PSK / WPA2-PSK – Use pre-shared key authentication for
WPA- and WPA2-compliant clients when they coexist in the same
network.
◆ Encryption Type – Selects the encryption cipher to use for multicast
and unicast data traffic.
■
None – No encryption is used.
■
WEP – Uses WEP shared keys.
■
TKIP – Uses TKIP keys for both multicast and unicast encryption.
■
AES – Uses AES keys for both multicast and unicast encryption.
Classification Range
0: USA, Canada, Taiwan CH 1 ~ CH 11
1: Europe CH 1 ~ CH 13
2: Spain CH 10 ~ CH 11
3: France CH 10 ~ CH 13
4: Japan (MKK) CH 14
5: Japan (TELEC) CH 1 ~ CH 14
6: ISRAEL CH 3 ~ CH 9
7: ISRAEL CH 5 ~ CH 13

SMC Networks WUSBS-N3 Specifications

General

Brand	SMC Networks
Model	WUSBS-N3
Category	Adapter
Language	English