23
EN
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
ADD PREGROUND COFFEE
PREGROUND MAXIMUM
ONE MEASURING CUP
A LONG coee with pre-ground coee
has been requested
Place pre-ground coee in the funnel (A21) (g.14)
and press to continue and complete
delivery.
FILL BEAN CONTAINER The coee beans have run out. Fill the beans container
(A16 - g.12)
.
GROUND TOO FINE. ADJUST
GRIND LEVEL 1 CLICK WHILE
IN OPERATION
The grinding is too ne and the coee is
delivered too slowly or not at all.
Repeat coee delivery and turn the grinding adjust-
ment dial
(g.11)
one click clockwise towards num-
ber 7 while the coee mill is in operation. If after
making at least 2 coees delivery is still too slow,
repeat the correction procedure, turning the grind-
ing adjustment dial another click (par. "Adjusting the
coee mill"
)
. If the problem persists, make sure the
water tank (A12) is fully inserted.
If the water softener lter (C4) is present,
an air bubble may have been released
inside the circuit, obstructing delivery.
Insert the hot water/steam spout (C6) in the appli-
ance and deliver a little water until the ow becomes
regular.
SELECT A MILDER TASTE
OR REDUCE PREGROUND
COFFEE QUANTITY
Too much coee has been used.
Select a milder taste by pressing AROMA (B6)
or reduce the quantity of pre-ground coee (maxi-
mum 1 measure).
To Next Page
Loading...
Need help?
General
