2
TABLE OF CONTENTS
IDENTIFICATION OF SAFETY SYMBOLS
Identication of Safety Symbols 2
Product Specications 3
Safety Rules 4
Packing List 6
Assembly 7
Operation 10
Maintenance 16
Troubleshooting Table 21
Exploded View 22
Parts List 23
Limited Warranty Statement 24
Symbol Name Designation/Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
hrs Hours Time
no No Load Speed Rational speed, at no load
/min Per Minute
Revolutions, strokes, surface speed, orbits,
etc., per minute.
Lithium-Ion Battery Recycling
Designates that this tool is in compliance
with Lithium-Ion battery recycling program
requirements.
Safety Alert Symbol Precautions that involve your safety.
Read Operator’s Manual
To reduce the risk of injury, user must read
and understand operator’s manual before
using this product.
Gloves
Wear non-slip, heavy-duty protective gloves
when handling the chainsaw and the blade.
Kickback DANGER! Be aware of kickback.
Keep Bystanders Away
Keep all bystanders at least 50 ft. (15 m)
away.
Wear Hearing Protection
Wear hearing protection when operating this
equipment.
Eye Protection
Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Operate with two hands
Hold and operate the saw properly with both
hands.
One Handed
Do not operate the saw using only one
hand.
Bar Nose Contact
Avoid bar noise contact.
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
To Next Page
Loading...
Need help?
General
